Satyam Composites is the largest manufacturer of FRP Pultruded Sections, GRP Profiles, FRP Structural Sections like I Beam, FRP Square Pipe, FRP Rectangular Tube, FRP Deck panel, FRP Angles, FRP Round Tubes, FRP Kickplates through Highly automated Pultrusion Process.
Our Structural Profiles are U.V Resistance, Corrosion Resistance & Fire retardant which provide longer life compare to other material & suppliers. Our Products are tested as per CTI 137 Standard (Fiberglass Pultruded Structural Products for use in Cooling towers).
Our Applicable Standards:
ASTM D256 – Test Method for Impact Resistance of Plastic and Electrical Insulating Material
ASTM D570 – Test Method for Water Absorption of Plastics.
ASTM D638 – Test Method for Tensile Properties of Plastics.
ASTM D695 – Test Method for Compressive Properties of Plastics.
ASTM D790 – Test Method for Flexural Properties of Plastics.
ASTM D696 – Test Method for Coefficient of Linear Thermal Expansion of Plastics
ASTM D2583 – Test Method for Indentation Hardness of Rigid Plastics.
ASTM E84 – Test Method for Surface Burning Characteristic of Burning Materials.
Our List of Pultruded Profiles:
Satyam FRP vs. Steel
Satyam’s fiberglass reinforced plastic is highly corrosion resistant. So unlike steel, it won’t rust when it’s exposed to harsh weather and chemicals. It’s also non-conductive and impact resistant., our FRP structural members are stronger than many steels in the lengthwise direction, and weigh up to 75% less.
LIST OF AVAILABLE PROFILE
|FRP SQUARE PIPE||FRP EQUAL LEG|
|Square Tube 4″ x 4″ x 1/4″||Equal leg 2″ x 1/4″|
|Square Tube 4″ x 4″ x 5/16″||Equal leg 3″ x 1/4″|
|Square Tube 4″ x 4″ x 3/8″||Equal leg 3″ x 1/8″|
|Square Tube 3″ x 3″ x 1/4″||Equal Leg Angle 4″ x 3/8″|
|Square Tube 3″ x 3″ x 3/8″||Equal Leg Angle 4″ x 1/4″|
|Square Tube 3″ x 3″ x 1/8″||Equal leg 50mm x 50mm x 5 mm|
|Square Tube 2″ x 2″ x 1/4″||Equal Leg 1-1/2″x1/4″|
|Square Tube 2″ x 2″ x 1/8″||FRP DECK PANEL|
|Square Tube 2-1/2″ x 2-1/2″ x 1/4″||DECKBOARD 638×38 x 3MM|
|Square Tube 2-1/2″ x 2-1/2″ x 1/8″||DECKBOARD 638×28.7 x 3.3MM|
|Square Tube 1-1/2″x1/4″||FRP I-BEAM|
|FRP CHANNEL||I-BEAM 150X75X6.35 MM|
|Channel 101.6 X 28.6 X 3.175mm||I-BEAM 250X50X3.5 MM|
|Channel 101.6 X 28.6 X 6.35mm||FRP CHANNEL|
|Channel 101.6 X 31.75 X 4mm||Channel 50X50X4 MM|
|Channel 101.6 X 31.75 X 5mm||Channel 60X20X4 MM|
|Channel 101.6 X 49.05 X 6.35mm||Channel 60X50X4 MM|
|Channel 106.5 X 28 X 3mm||Channel 75X30X4 MM|
|Channel 127 X 34.925 X 6.35mm||Channel 75X40X4 MM|
|Channel 139.7 X 38.1 X 4.76mm||Channel 100X30X3 MM|
|Channel 150 X 50 X 3.5mm||Channel 100X30X4 MM|
|Channel 150 X 50 X 4mm||Channel 100X50X4 MM|
|Channel 150 X 75 X 4mm||Channel 100X80X4 MM|
|Channel 152.4 X 41.3 X 3.175mm||Channel 100X100X4 MM|
|Channel 152.4 X 41.3 X 6.35mm||Channel 150X30X4 MM|
|Channel 152.4 X 41.3 X 9.52mm||Channel 150X50X4 MM|
|Channel 152.4 X 42.84 X 6.35mm||Channel 150X80X4 MM|
|Channel 152.4 X 42.84 X 9.52mm||Channel 150X100X4 MM|
|Channel 160 X 28 X 2.5mm||Channel 200X50X4 MM|
|Channel 200 X 100 X 10mm||Channel 300X50X4 MM|
|Channel 200 X 100 X 4mm||Channel 300X75X4 MM|
|Channel 200 X 50 X 4mm||Channel 300X100X4 MM|
|Channel 203.2 X 55.56 X 6.35mm||Channel 50 X 25 X 3mm|
|Channel 203.2 X 55.56 X 9.525mm||Channel 50 X 25 X 4mm|
|Channel 207 X 28 X 3mm||Channel 50 X 50 X 3mm|
|Channel 300 X 50 X 4mm||Channel 50 X 50 X 4mm|
|Channel 300 X 75 X 5mm||Channel 55.5 X 28 X 2.5mm|
|Channel 50X30X3 MM||Channel 75 X 25 X 4mm|
|Channel 50X30X4 MM||Channel 75 X 30 X 4mm|
ADVANTAGES OF FRP PULTRUDED/STRUCTURAL SECTIONS:
- High Strength Compared to other Material
- Long Life in a most corrosive atmosphere
- Low Maintenance compared to wood & Steel
- Fire Resistance
- Lightweight compared to wood & Steel
Applications of FRP Structural Products:
- Cooling Tower Structure
- PEB Building
- Solar Rooftop Installations